HP 1067/30.5/Removable Adhesive Fabric, 42", 8SU06A, 289 g/m2, plátno, 1067 mm x 30.5 m, bílé, pro inkoustové tiskárny, role

Easy to install, reposition, and removeEnjoy the ease of working with this repositionable adhesive-back fabric that is easy to install, reposition, and remove with virtually no residue. The special adhesive is designed to stick to non-porous surfaces to create seamless, photographic image quality wall and floor graphics. Tested and approved for indoor smooth floor graphics4.Reduce the environmental impact of printingOffer an adhesive fabric that complies with high health standards. Help meet environmental and safety objectives with this REACH compliant,1 flame-resistant2 adhesive fabric.Grab attention with vibrant image quality for a variety of applicationsCapture realistic graphic detail for applications from wall murals and event signage to retail displays. Achieve a high-quality look with this versatile, easy-to-handle, repositionable self-adhesive fabric—ideal for a wide range of indoor and outdoor applications.Ink compatibilityCompatible with HP Bright Office Inks, HP Vivid Photo Inks, PageWide XL and HP Latex InksCore size3-in core with a removable 2-in adapterWeight (With liner)289 g/m? per ISO 536 Test MethodThickness (With liner)304 microns/12 mil per ISO 20534 Test MethodLiner120 g/m?, double-sided PE-coated silicone paperAdhesiveClear, removable, and repositionable adhesiveRemovabilityUp to 3 years removable/repositionable indoorsOpacityGreater than 85% per TAPPI T-425 Test Method and ISO 2471 Test MethodBrightnessGreater than 87% per Tappi-T452 Test MethodWhiteness118 per ASTM E313-98 Test MethodFinishMatteSlip ratingCertified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)4Operating temperature15 to 25° C / 59 to 77° FOperating humidity20-80% RHWater resistanceModerately water-resistant3Wind orientationPrint side outDry timeImmediateFlame resistanceClass A, ASTM E842LaminationFor additional protection, liquid or spray coatings are recommendedPageWide cutterThe weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutterShelf life1 year, unopened in original packagingStorage temperature10 to 27° C / 50 to 80° FStorage humidity35 to 65% RHEnvironmentalREACH compliant1Finishing/post-processingUse a carbide knife for kiss and die-cuttingInstallation tipTo install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting.Country of originProduct of China and Malaysia